How much does fencing cost per foot in Vermont?

Installed per-foot prices run $10–$27 for chain-link, $20–$40 for 4-ft wood picket, $25–$50 for 6-ft wood privacy, $15–$40 for vinyl, and $25–$60 for aluminum. Going to 8 ft adds about 30%, and sloped or rocky ground adds $5–$10 per foot — worth asking how a bid handles both before comparing numbers.

Do I need a permit to build a fence in Panton?

Usually, and it's cheap. Most Vermont towns charge $25–$100 for a fence up to 6 ft (Boston's runs about $60), and some ask only for a zoning sign-off. Go above 6 ft and many towns require zoning relief, not just a permit. Make two calls before any posts go in: your building department, and 811 to mark buried utilities. The markout is free and required in every New England state.

What does it cost to remove an old fence?

Tear-out and disposal runs $3–$7 per linear foot, so clearing a 150-foot run costs $450–$1,050. Most installers roll removal into the new-fence quote — just confirm the line item is there, since hauling old pressure-treated wood or concrete-set posts is real work that shows up somewhere.

Which fence material is the best value?

Chain-link is the budget answer at $10–$27 per foot and nearly maintenance-free. Vinyl at $15–$40 costs more up front than wood but never needs staining. Wood privacy at $25–$50 is the classic look with the classic upkeep — plan on re-staining every few years. Aluminum at $25–$60 buys the ornamental look for front yards where privacy isn't the point.

Tavlee

Cost guide · Vermont

How much does a fence cost in Panton?

Most fencing projects in Panton run $3,550 – $7,000, with a typical fencing project around $5,300. Adjust the estimate for your job below. Figures reviewed 2026-11.

Fence length(linear ft)

Walk the line and pace it off — a pace is about 3 feet.

Material

8-ft heightAbove the standard 6 ft — often needs zoning sign-off too.

Walk gates

1

Remove existing fence

Estimated range

$3,550 – $7,000

Typical fencing project around $5,300

Fence installation (labor & materials): $3,300 – $6,600
Walk gates: $220 – $350
Permit: $50

A ballpark from regional averages — not a quote. Your price depends on the specifics of the job, so get written quotes from two or three licensed pros before deciding.

How this estimate works

A ballpark from regional averages — not a quote. Your price depends on the specifics of the job, so get written quotes from two or three licensed pros before deciding.

Per-foot rates are installed — posts set below the frost line, materials, and labor — for standard heights on workable ground.
8-ft fences are modeled at +30%, and heights above 6 ft often need zoning board sign-off on top of the standard permit.
Sloped or ledgy yards add roughly $5–$10 per linear foot for stepped sections and harder digging — not included above.
The permit line uses a typical New England town fence permit of about $60 (Boston's exact fee); most towns charge $25–$100 for a fence up to 6 ft, and a few charge nothing.
The gate band covers standard walk gates; wide driveway and double gates price separately toward the top of the $150–$580 gate range.

Ranges are built from published New England contractor pricing and regional cost indices, scaled to Vermont (×0.88 on the Greater Boston baseline that the written figures on this page quote), last reviewed 2026-11.

What drives the price

Material and height

The per-foot spread between chain-link and aluminum is 3–6×, and height compounds it: an 8-ft privacy run costs about 30% more than 6-ft for the same line. Decide what the fence is for — containment, privacy, or curb appeal — before shopping materials, and the price range narrows itself.

Length and gates

Long runs spread the crew's mobilization over more feet, so per-foot pricing improves as jobs grow. Gates cut the other way: each walk gate runs $250–$400 installed because hinging, latching, and squaring a gate is the fussiest part of the job, and driveway gates cost more still.

Your ground

Fence quotes assume diggable soil. New England's glacial rock, roots, and slopes often disagree — stepped sections and hand-digging around ledge add $5–$10 per foot. A contractor who walks the line before quoting is pricing your yard, not an average one.

Property lines and paperwork

The permit is the easy part (about $60 in Boston; $25–$100 in most towns). The expensive mistake is building on the neighbor's side of the line. Property-line disputes are common enough that confirming pins or paying for a survey is cheap insurance before setting posts meant to last 20 years.

Planning the job? Read the full guide to hiring fence contractors in Vermont →

Get real quotes from top-rated fence contractors in Panton

An estimate is a starting point — written quotes are the real number. These are the strongest fence contractors on the evidence: reviews weighed across sources and licenses verified against the state registry.

Brown Trout Design and Build

Historic-home sunroom renovation on time and under budget4.0

F.E. Hart Fence Company Inc

68 years in business3.9

New North Repair and Remodel

Fireplace mantel rebuilt, old wainscoting replaced3.9

See all 9 fence contractors in Panton

Fence cost questions, answered

How much does a fence cost in Panton?: The average fence project in Panton runs about $3,741 — roughly $26 per linear foot installed. A typical 150-foot run of 6-ft wood privacy fence lands between $3,750 and $7,500, plus $250–$400 per walk gate and about $60 for the permit. Chain-link comes in well under that; aluminum and tall privacy runs come in above.
How much does fencing cost per foot in Vermont?: Installed per-foot prices run $10–$27 for chain-link, $20–$40 for 4-ft wood picket, $25–$50 for 6-ft wood privacy, $15–$40 for vinyl, and $25–$60 for aluminum. Going to 8 ft adds about 30%, and sloped or rocky ground adds $5–$10 per foot — worth asking how a bid handles both before comparing numbers.
Do I need a permit to build a fence in Panton?: Usually, and it's cheap. Most Vermont towns charge $25–$100 for a fence up to 6 ft (Boston's runs about $60), and some ask only for a zoning sign-off. Go above 6 ft and many towns require zoning relief, not just a permit. Make two calls before any posts go in: your building department, and 811 to mark buried utilities. The markout is free and required in every New England state.
What does it cost to remove an old fence?: Tear-out and disposal runs $3–$7 per linear foot, so clearing a 150-foot run costs $450–$1,050. Most installers roll removal into the new-fence quote — just confirm the line item is there, since hauling old pressure-treated wood or concrete-set posts is real work that shows up somewhere.
Which fence material is the best value?: Chain-link is the budget answer at $10–$27 per foot and nearly maintenance-free. Vinyl at $15–$40 costs more up front than wood but never needs staining. Wood privacy at $25–$50 is the classic look with the classic upkeep — plan on re-staining every few years. Aluminum at $25–$60 buys the ornamental look for front yards where privacy isn't the point.

Waterproofing Contractors in Panton

Handymen in Panton

Carpenters in Panton

Flooring Contractors in Panton

Exterminators in Panton

Home Inspectors in Panton

Movers in Panton

House Cleaners in Panton

Pool Cleaners in Panton

Masonry Contractors in Panton

Ratings weighed across every source · state-license verified · citations you can open.